Search Products

FilterClear All

Inquiry

Boring Bars

15T916 | Boring Bars

$29.65

id :1179, Mfr Model :QMBB-020075, Cutting Direction :Right Hand, Center to Cutting Tip :0.0120 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0050 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.0750 in, Measurement System :Fractional Inch, Min Bore Dia :0.0200 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0120 in, Overhang :0.5900 in,

+ Add to Cart

15T917 | Boring Bars

$32.09

id :1180, Mfr Model :QMBB-020075X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0120 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0050 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.0750 in, Measurement System :Fractional Inch, Min Bore Dia :0.0200 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0120 in, Overhang :0.5900 in,

+ Add to Cart

15T918 | Boring Bars

$26.56

id :1181, Mfr Model :QMBB-025100, Cutting Direction :Right Hand, Center to Cutting Tip :0.0150 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0050 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0250 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0150 in, Overhang :0.5900 in,

+ Add to Cart

15T919 | Boring Bars

$28.52

id :1182, Mfr Model :QMBB-025100X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0150 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0050 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0250 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0150 in, Overhang :0.5900 in,

+ Add to Cart

15T920 | Boring Bars

$26.56

id :1183, Mfr Model :QMBB-030100, Cutting Direction :Right Hand, Center to Cutting Tip :0.0180 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0050 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0300 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0180 in, Overhang :0.5900 in,

+ Add to Cart

15T921 | Boring Bars

$28.43

id :1184, Mfr Model :QMBB-030100X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0180 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0050 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0300 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0180 in, Overhang :0.5900 in,

+ Add to Cart

15T922 | Boring Bars

$26.06

id :1185, Mfr Model :QMBB-035100, Cutting Direction :Right Hand, Center to Cutting Tip :0.0210 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0050 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0350 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0210 in, Overhang :0.5900 in,

+ Add to Cart

15T923 | Boring Bars

$29.57

id :1186, Mfr Model :QMBB-035100X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0210 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0050 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0350 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0210 in, Overhang :0.5900 in,

+ Add to Cart

15T924 | Boring Bars

$26.00

id :1187, Mfr Model :QMBB-035150, Cutting Direction :Right Hand, Center to Cutting Tip :0.0210 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0050 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1500 in, Measurement System :Fractional Inch, Min Bore Dia :0.0350 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0210 in, Overhang :0.5900 in,

+ Add to Cart

15T925 | Boring Bars

$28.43

id :1188, Mfr Model :QMBB-035150X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0210 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0050 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1500 in, Measurement System :Fractional Inch, Min Bore Dia :0.0350 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0210 in, Overhang :0.5900 in,

+ Add to Cart

15T926 | Boring Bars

$26.56

id :1189, Mfr Model :QMBB-040150, Cutting Direction :Right Hand, Center to Cutting Tip :0.0240 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0050 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1500 in, Measurement System :Fractional Inch, Min Bore Dia :0.0400 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0240 in, Overhang :0.5900 in,

+ Add to Cart

15T927 | Boring Bars

$29.57

id :1190, Mfr Model :QMBB-040150X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0240 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0050 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1500 in, Measurement System :Fractional Inch, Min Bore Dia :0.0400 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0240 in, Overhang :0.5900 in,

+ Add to Cart

15T928 | Boring Bars

$26.25

id :1191, Mfr Model :QMBB-040200, Cutting Direction :Right Hand, Center to Cutting Tip :0.0240 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0050 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.2000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0400 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0240 in, Overhang :0.5900 in,

+ Add to Cart

15T929 | Boring Bars

$28.43

id :1192, Mfr Model :QMBB-040200X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0240 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0050 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.2000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0400 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0240 in, Overhang :0.5900 in,

+ Add to Cart

15T930 | Boring Bars

$26.56

id :1193, Mfr Model :QMBB-045150, Cutting Direction :Right Hand, Center to Cutting Tip :0.0270 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0050 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1500 in, Measurement System :Fractional Inch, Min Bore Dia :0.0450 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0270 in, Overhang :0.5900 in,

+ Add to Cart

15T931 | Boring Bars

$29.47

id :1194, Mfr Model :QMBB-045150X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0270 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0050 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1500 in, Measurement System :Fractional Inch, Min Bore Dia :0.0450 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0270 in, Overhang :0.5900 in,

+ Add to Cart

15T932 | Boring Bars

$25.87

id :1195, Mfr Model :QMBB-045200, Cutting Direction :Right Hand, Center to Cutting Tip :0.0270 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0050 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.2000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0450 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0270 in, Overhang :0.5900 in,

+ Add to Cart

15T933 | Boring Bars

$28.06

id :1196, Mfr Model :QMBB-045200X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0270 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0050 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.2000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0450 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0270 in, Overhang :0.5900 in,

+ Add to Cart

15T934 | Boring Bars

$21.57

id :1197, Mfr Model :QMBB-050150, Cutting Direction :Right Hand, Center to Cutting Tip :0.0310 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0050 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1500 in, Measurement System :Fractional Inch, Min Bore Dia :0.0500 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0310 in, Overhang :0.5900 in,

+ Add to Cart

15T935 | Boring Bars

$22.52

id :1198, Mfr Model :QMBB-050150X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0310 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0130 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1500 in, Measurement System :Fractional Inch, Min Bore Dia :0.0500 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0310 in, Overhang :0.5900 in,

+ Add to Cart

15T936 | Boring Bars

$20.74

id :1199, Mfr Model :QMBB-050200, Cutting Direction :Right Hand, Center to Cutting Tip :0.0310 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0130 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.2000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0500 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0310 in, Overhang :0.5900 in,

+ Add to Cart

15T937 | Boring Bars

$22.35

id :1200, Mfr Model :QMBB-050200X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0310 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0130 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.2000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0500 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0310 in, Overhang :0.5900 in,

+ Add to Cart

15T938 | Boring Bars

$20.51

id :1201, Mfr Model :QMBB-050300, Cutting Direction :Right Hand, Center to Cutting Tip :0.0310 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0130 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.3000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0500 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0310 in, Overhang :0.5900 in,

+ Add to Cart

15T939 | Boring Bars

$22.66

id :1202, Mfr Model :QMBB-050300X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0310 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0130 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.3000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0500 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0310 in, Overhang :0.5900 in,

+ Add to Cart

15T940 | Boring Bars

$20.74

id :1203, Mfr Model :QMBB-060150, Cutting Direction :Right Hand, Center to Cutting Tip :0.0380 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0130 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1500 in, Measurement System :Fractional Inch, Min Bore Dia :0.0600 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0380 in, Overhang :0.5900 in,

+ Add to Cart

15T941 | Boring Bars

$22.16

id :1204, Mfr Model :QMBB-060150X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0380 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0150 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1500 in, Measurement System :Fractional Inch, Min Bore Dia :0.0600 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0380 in, Overhang :0.5900 in,

+ Add to Cart

15T942 | Boring Bars

$20.74

id :1205, Mfr Model :QMBB-060200, Cutting Direction :Right Hand, Center to Cutting Tip :0.0380 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0150 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.2000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0600 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0380 in, Overhang :0.5900 in,

+ Add to Cart

15T943 | Boring Bars

$22.66

id :1206, Mfr Model :QMBB-060200X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0380 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0150 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.2000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0600 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0380 in, Overhang :0.5900 in,

+ Add to Cart

15T944 | Boring Bars

$20.74

id :1207, Mfr Model :QMBB-060300, Cutting Direction :Right Hand, Center to Cutting Tip :0.0380 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0150 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.3000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0600 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0380 in, Overhang :0.5900 in,

+ Add to Cart

15T945 | Boring Bars

$23.42

id :1208, Mfr Model :QMBB-060300X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0380 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0150 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.3000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0600 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0380 in, Overhang :0.5900 in,

+ Add to Cart
× Success!success