id :1239, Mfr Model :QMBB-100300X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0630 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0250 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.3000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1000 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0630 in, Overhang :0.5900 in,
+ Add to Cartid :1240, Mfr Model :QMBB-100500, Cutting Direction :Right Hand, Center to Cutting Tip :0.0630 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0250 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.1000 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0630 in, Overhang :0.5900 in,
+ Add to Cartid :1241, Mfr Model :QMBB-100500X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0630 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0250 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.1000 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0630 in, Overhang :0.5900 in,
+ Add to Cartid :1242, Mfr Model :QMBB-100700, Cutting Direction :Right Hand, Center to Cutting Tip :0.0630 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0250 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.7000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1000 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0630 in, Overhang :1.0900 in,
+ Add to Cartid :1243, Mfr Model :QMBB-100700X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0630 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0250 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.7000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1000 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0630 in, Overhang :1.0900 in,
+ Add to Cartid :1244, Mfr Model :QMBB-100800, Cutting Direction :Right Hand, Center to Cutting Tip :0.0630 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0250 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.8000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1000 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0630 in, Overhang :1.0900 in,
+ Add to Cartid :1245, Mfr Model :QMBB-100800X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0630 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0250 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.8000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1000 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0630 in, Overhang :1.0900 in,
+ Add to Cartid :1246, Mfr Model :QPR-070200, Cutting Direction :Right Hand, Center to Cutting Tip :-0.0238 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :1-1/2 in, Radius :0.0050 in, Boring Bar Type :Radial Profiling, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0250 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.2000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0700 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :-0.0238 in, Overhang :0.5900 in,
+ Add to Cartid :1247, Mfr Model :QPR-070200X, Cutting Direction :Right Hand, Center to Cutting Tip :-0.0238 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :1-1/2 in, Radius :0.0050 in, Boring Bar Type :Radial Profiling, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0250 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.2000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0700 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :-0.0238 in, Overhang :0.5900 in,
+ Add to Cartid :1248, Mfr Model :QPR-070300, Cutting Direction :Right Hand, Center to Cutting Tip :-0.0238 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :1-1/2 in, Radius :0.0050 in, Boring Bar Type :Radial Profiling, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0250 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.3000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0700 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :-0.0238 in, Overhang :0.5900 in,
+ Add to Cartid :1249, Mfr Model :QPR-070300X, Cutting Direction :Right Hand, Center to Cutting Tip :-0.0238 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :1-1/2 in, Radius :0.0050 in, Boring Bar Type :Radial Profiling, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0250 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.3000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0700 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :-0.0238 in, Overhang :0.5900 in,
+ Add to Cartid :1250, Mfr Model :QPR-070500, Cutting Direction :Right Hand, Center to Cutting Tip :-0.0238 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :1-1/2 in, Radius :0.0050 in, Boring Bar Type :Radial Profiling, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0250 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.0700 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :-0.0238 in, Overhang :0.5900 in,
+ Add to Cartid :1251, Mfr Model :QPR-070500X, Cutting Direction :Right Hand, Center to Cutting Tip :-0.0238 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :1-1/2 in, Radius :0.0050 in, Boring Bar Type :Radial Profiling, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0250 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.0700 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :-0.0238 in, Overhang :0.5900 in,
+ Add to Cartid :1252, Mfr Model :QPR-110250, Cutting Direction :Right Hand, Center to Cutting Tip :0.0163 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :1-1/2 in, Radius :0.0050 in, Boring Bar Type :Radial Profiling, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0400 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.1100 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0163 in, Overhang :0.5900 in,
+ Add to Cartid :1253, Mfr Model :QPR-110250X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0163 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :1-1/2 in, Radius :0.0050 in, Boring Bar Type :Radial Profiling, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0400 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.1100 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0163 in, Overhang :0.5900 in,
+ Add to Cartid :1254, Mfr Model :QPR-110500, Cutting Direction :Right Hand, Center to Cutting Tip :0.0163 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :1-1/2 in, Radius :0.0050 in, Boring Bar Type :Radial Profiling, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0400 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.1100 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0163 in, Overhang :0.5900 in,
+ Add to Cartid :1255, Mfr Model :QPR-110500X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0163 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :1-1/2 in, Radius :0.0080 in, Boring Bar Type :Radial Profiling, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0400 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.1100 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0163 in, Overhang :0.5900 in,
+ Add to Cartid :1256, Mfr Model :QPR-120250, Cutting Direction :Right Hand, Center to Cutting Tip :0.0263 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :1-1/2 in, Radius :0.0080 in, Boring Bar Type :Radial Profiling, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0500 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.1200 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0263 in, Overhang :0.5900 in,
+ Add to Cartid :1257, Mfr Model :QPR-120250X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0263 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :1-1/2 in, Radius :0.0080 in, Boring Bar Type :Radial Profiling, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0500 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.1200 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0263 in, Overhang :0.5900 in,
+ Add to Cartid :1258, Mfr Model :QPR-120500, Cutting Direction :Right Hand, Center to Cutting Tip :0.0263 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :1-1/2 in, Radius :0.0080 in, Boring Bar Type :Radial Profiling, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0500 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.1200 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0263 in, Overhang :0.5900 in,
+ Add to Cartid :1259, Mfr Model :QPR-120500X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0263 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :1-1/2 in, Radius :0.0080 in, Boring Bar Type :Radial Profiling, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0500 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.1200 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0263 in, Overhang :0.5900 in,
+ Add to Cartid :1260, Mfr Model :QPR-120750, Cutting Direction :Right Hand, Center to Cutting Tip :0.0263 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :2 in, Radius :0.0080 in, Boring Bar Type :Radial Profiling, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0500 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :3/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.1200 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0263 in, Overhang :1.0900 in,
+ Add to Cartid :1261, Mfr Model :QPR-120750X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0263 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :2 in, Radius :0.0080 in, Boring Bar Type :Radial Profiling, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0500 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :3/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.1200 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0263 in, Overhang :1.0900 in,
+ Add to Cartid :1262, Mfr Model :QPR-1601000, Cutting Direction :Right Hand, Center to Cutting Tip :0.0663 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :2 in, Radius :0.0080 in, Boring Bar Type :Radial Profiling, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0500 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1 in, Measurement System :Fractional Inch, Min Bore Dia :0.1600 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0663 in, Overhang :1.0900 in,
+ Add to Cartid :1263, Mfr Model :QPR-1601000X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0663 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :2 in, Radius :0.0080 in, Boring Bar Type :Radial Profiling, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0500 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1 in, Measurement System :Fractional Inch, Min Bore Dia :0.1600 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0663 in, Overhang :1.0900 in,
+ Add to Cartid :1264, Mfr Model :QPR-160500, Cutting Direction :Right Hand, Center to Cutting Tip :0.0663 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :1-1/2 in, Radius :0.0080 in, Boring Bar Type :Radial Profiling, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0500 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.1600 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0663 in, Overhang :0.5900 in,
+ Add to Cartid :1265, Mfr Model :QPR-160500X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0663 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :1-1/2 in, Radius :0.0080 in, Boring Bar Type :Radial Profiling, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0500 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.1600 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0663 in, Overhang :0.5900 in,
+ Add to Cartid :1266, Mfr Model :QPR-160750, Cutting Direction :Right Hand, Center to Cutting Tip :0.0663 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :2 in, Radius :0.0080 in, Boring Bar Type :Radial Profiling, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0500 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :3/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.1600 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0663 in, Overhang :1.0900 in,
+ Add to Cartid :1267, Mfr Model :QPR-160750X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0663 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :2 in, Radius :0.0080 in, Boring Bar Type :Radial Profiling, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0500 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :3/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.1600 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0663 in, Overhang :1.0900 in,
+ Add to Cartid :1268, Mfr Model :QPR-1801000, Cutting Direction :Right Hand, Center to Cutting Tip :0.0550 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Split Geometry, Cutting Application :Finishing; Radial Profiling; Thread Relief, Overall Length :2-1/2 in, Radius :0.0080 in, Boring Bar Type :Radial Profiling, Shank Dia :1/4 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :50 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0800 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1 in, Measurement System :Fractional Inch, Min Bore Dia :0.1800 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0550 in, Overhang :1.3530 in,
+ Add to Cart