Search Products

FilterClear All

Inquiry

Boring Bars

15T946 | Boring Bars

$20.74

id :1209, Mfr Model :QMBB-060400, Cutting Direction :Right Hand, Center to Cutting Tip :0.0380 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0150 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.4000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0600 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0380 in, Overhang :0.5900 in,

+ Add to Cart

15T947 | Boring Bars

$22.25

id :1210, Mfr Model :QMBB-060400X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0380 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0150 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.4000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0600 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0380 in, Overhang :0.5900 in,

+ Add to Cart

15T948 | Boring Bars

$20.29

id :1211, Mfr Model :QMBB-060500, Cutting Direction :Right Hand, Center to Cutting Tip :0.0380 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0150 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.0600 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0380 in, Overhang :0.5900 in,

+ Add to Cart

15T949 | Boring Bars

$22.60

id :1212, Mfr Model :QMBB-060500X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0380 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0150 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.0600 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0380 in, Overhang :0.5900 in,

+ Add to Cart

15T950 | Boring Bars

$20.74

id :1213, Mfr Model :QMBB-070150, Cutting Direction :Right Hand, Center to Cutting Tip :0.0430 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0150 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1500 in, Measurement System :Fractional Inch, Min Bore Dia :0.0700 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0430 in, Overhang :0.5900 in,

+ Add to Cart

15T951 | Boring Bars

$22.52

id :1214, Mfr Model :QMBB-070150X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0430 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0150 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1500 in, Measurement System :Fractional Inch, Min Bore Dia :0.0700 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0430 in, Overhang :0.5900 in,

+ Add to Cart

15T952 | Boring Bars

$20.74

id :1215, Mfr Model :QMBB-070200, Cutting Direction :Right Hand, Center to Cutting Tip :0.0430 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0150 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.2000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0700 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0430 in, Overhang :0.5900 in,

+ Add to Cart

15T953 | Boring Bars

$22.32

id :1216, Mfr Model :QMBB-070200X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0430 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0150 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.2000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0700 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0430 in, Overhang :0.5900 in,

+ Add to Cart

15T954 | Boring Bars

$20.74

id :1217, Mfr Model :QMBB-070300, Cutting Direction :Right Hand, Center to Cutting Tip :0.0430 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0150 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.3000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0700 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0430 in, Overhang :0.5900 in,

+ Add to Cart

15T955 | Boring Bars

$22.60

id :1218, Mfr Model :QMBB-070300X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0430 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0150 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.3000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0700 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0430 in, Overhang :0.5900 in,

+ Add to Cart

15T956 | Boring Bars

$20.74

id :1219, Mfr Model :QMBB-070400, Cutting Direction :Right Hand, Center to Cutting Tip :0.0430 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0150 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.4000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0700 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0430 in, Overhang :0.5900 in,

+ Add to Cart

15T957 | Boring Bars

$22.66

id :1220, Mfr Model :QMBB-070400X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0430 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0150 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.4000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0700 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0430 in, Overhang :0.5900 in,

+ Add to Cart

15T958 | Boring Bars

$20.74

id :1221, Mfr Model :QMBB-070500, Cutting Direction :Right Hand, Center to Cutting Tip :0.0430 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0150 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.0700 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0430 in, Overhang :0.5900 in,

+ Add to Cart

15T959 | Boring Bars

$22.52

id :1222, Mfr Model :QMBB-070500X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0430 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0150 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.0700 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0430 in, Overhang :0.5900 in,

+ Add to Cart

15T960 | Boring Bars

$20.29

id :1223, Mfr Model :QMBB-080150, Cutting Direction :Right Hand, Center to Cutting Tip :0.0500 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0150 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1500 in, Measurement System :Fractional Inch, Min Bore Dia :0.0800 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0500 in, Overhang :0.5900 in,

+ Add to Cart

15T961 | Boring Bars

$23.11

id :1224, Mfr Model :QMBB-080150X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0500 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0200 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1500 in, Measurement System :Fractional Inch, Min Bore Dia :0.0800 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0500 in, Overhang :0.5900 in,

+ Add to Cart

15T962 | Boring Bars

$20.74

id :1225, Mfr Model :QMBB-080200, Cutting Direction :Right Hand, Center to Cutting Tip :0.0500 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0200 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.2000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0800 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0500 in, Overhang :0.5900 in,

+ Add to Cart

15T963 | Boring Bars

$22.66

id :1226, Mfr Model :QMBB-080200X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0500 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0200 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.2000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0800 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0500 in, Overhang :0.5900 in,

+ Add to Cart

15T964 | Boring Bars

$20.74

id :1227, Mfr Model :QMBB-080300, Cutting Direction :Right Hand, Center to Cutting Tip :0.0500 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0200 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.3000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0800 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0500 in, Overhang :0.5900 in,

+ Add to Cart

15T965 | Boring Bars

$22.40

id :1228, Mfr Model :QMBB-080300X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0500 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0200 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.3000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0800 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0500 in, Overhang :0.5900 in,

+ Add to Cart

15T966 | Boring Bars

$20.74

id :1229, Mfr Model :QMBB-080500, Cutting Direction :Right Hand, Center to Cutting Tip :0.0500 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0200 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.0800 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0500 in, Overhang :0.5900 in,

+ Add to Cart

15T967 | Boring Bars

$22.60

id :1230, Mfr Model :QMBB-080500X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0500 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0200 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.0800 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0500 in, Overhang :0.5900 in,

+ Add to Cart

15T968 | Boring Bars

$20.74

id :1231, Mfr Model :QMBB-080600, Cutting Direction :Right Hand, Center to Cutting Tip :0.0500 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0200 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.6000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0800 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0500 in, Overhang :1.0900 in,

+ Add to Cart

15T969 | Boring Bars

$22.52

id :1232, Mfr Model :QMBB-080600X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0500 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0200 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.6000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0800 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0500 in, Overhang :1.0900 in,

+ Add to Cart

15T970 | Boring Bars

$20.74

id :1233, Mfr Model :QMBB-090300, Cutting Direction :Right Hand, Center to Cutting Tip :0.0550 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0200 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.3000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0900 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0550 in, Overhang :0.5900 in,

+ Add to Cart

15T971 | Boring Bars

$22.40

id :1234, Mfr Model :QMBB-090300X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0550 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0200 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.3000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0900 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0550 in, Overhang :0.5900 in,

+ Add to Cart

15T972 | Boring Bars

$20.74

id :1235, Mfr Model :QMBB-090500, Cutting Direction :Right Hand, Center to Cutting Tip :0.0550 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0200 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.0900 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0550 in, Overhang :0.5900 in,

+ Add to Cart

15T973 | Boring Bars

$22.52

id :1236, Mfr Model :QMBB-090500X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0550 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0200 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.0900 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0550 in, Overhang :0.5900 in,

+ Add to Cart

15T975 | Boring Bars

$23.42

id :1237, Mfr Model :QMBB-090700X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0550 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0200 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.7000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0900 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0550 in, Overhang :1.0900 in,

+ Add to Cart

15T976 | Boring Bars

$20.74

id :1238, Mfr Model :QMBB-100300, Cutting Direction :Right Hand, Center to Cutting Tip :0.0630 in, Features :Coolant Fed Enabled Shank Design;On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring; Facing, Overall Length :1-1/2 in, Radius :0.0060 in, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23153308, Country of Origin :USA (subject to change), Projection :0.0200 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.3000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1000 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0630 in, Overhang :0.5900 in,

+ Add to Cart
× Success!success