Product catagories

Search Products

FilterClear All

Inquiry

Carbide-Tipped Jobber-Length Drill Bits

product-img product-img

827DV6 | Carbide-Tipped Jobber-Length Drill Bits

$5.99

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DV7 | Carbide-Tipped Jobber-Length Drill Bits

$5.83

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DV8 | Carbide-Tipped Jobber-Length Drill Bits

$5.83

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DV9 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DW0 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DW1 | Carbide-Tipped Jobber-Length Drill Bits

$9.31

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DW2 | Carbide-Tipped Jobber-Length Drill Bits

$10.62

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DW3 | Carbide-Tipped Jobber-Length Drill Bits

$10.62

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DW4 | Carbide-Tipped Jobber-Length Drill Bits

$11.75

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DW5 | Carbide-Tipped Jobber-Length Drill Bits

$12.31

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DW6 | Carbide-Tipped Jobber-Length Drill Bits

$13.04

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DW7 | Carbide-Tipped Jobber-Length Drill Bits

$13.77

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DW8 | Carbide-Tipped Jobber-Length Drill Bits

$13.77

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DW9 | Carbide-Tipped Jobber-Length Drill Bits

$14.68

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DX0 | Carbide-Tipped Jobber-Length Drill Bits

$15.55

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DX1 | Carbide-Tipped Jobber-Length Drill Bits

$16.86

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DX2 | Carbide-Tipped Jobber-Length Drill Bits

$18.40

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DX3 | Carbide-Tipped Jobber-Length Drill Bits

$20.08

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DX4 | Carbide-Tipped Jobber-Length Drill Bits

$22.04

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DX5 | Carbide-Tipped Jobber-Length Drill Bits

$24.49

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DX6 | Carbide-Tipped Jobber-Length Drill Bits

$27.48

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DX7 | Carbide-Tipped Jobber-Length Drill Bits

$28.45

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DX8 | Carbide-Tipped Jobber-Length Drill Bits

$28.45

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DX9 | Carbide-Tipped Jobber-Length Drill Bits

$30.79

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DY0 | Carbide-Tipped Jobber-Length Drill Bits

$32.42

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DY1 | Carbide-Tipped Jobber-Length Drill Bits

$35.82

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DY2 | Carbide-Tipped Jobber-Length Drill Bits

$35.82

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DY3 | Carbide-Tipped Jobber-Length Drill Bits

$40.34

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DY4 | Carbide-Tipped Jobber-Length Drill Bits

$42.95

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DY5 | Carbide-Tipped Jobber-Length Drill Bits

$43.17

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
× Success！success