Product catagories

Search Products

FilterClear All

Inquiry

Carbide-Tipped Jobber-Length Drill Bits

product-img product-img

827EJ6 | Carbide-Tipped Jobber-Length Drill Bits

$9.31

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EJ7 | Carbide-Tipped Jobber-Length Drill Bits

$9.31

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EJ8 | Carbide-Tipped Jobber-Length Drill Bits

$9.31

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EJ9 | Carbide-Tipped Jobber-Length Drill Bits

$9.31

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EK0 | Carbide-Tipped Jobber-Length Drill Bits

$9.31

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EK1 | Carbide-Tipped Jobber-Length Drill Bits

$9.31

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EK2 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EK3 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EK4 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EK5 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EK6 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EK7 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EK8 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EK9 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EL0 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EL1 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EL2 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EL3 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EL4 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EL5 | Carbide-Tipped Jobber-Length Drill Bits

$5.99

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EL6 | Carbide-Tipped Jobber-Length Drill Bits

$5.83

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EL7 | Carbide-Tipped Jobber-Length Drill Bits

$5.99

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EL8 | Carbide-Tipped Jobber-Length Drill Bits

$5.83

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EL9 | Carbide-Tipped Jobber-Length Drill Bits

$5.83

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EM0 | Carbide-Tipped Jobber-Length Drill Bits

$5.99

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EM1 | Carbide-Tipped Jobber-Length Drill Bits

$5.83

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EM2 | Carbide-Tipped Jobber-Length Drill Bits

$5.99

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EM3 | Carbide-Tipped Jobber-Length Drill Bits

$5.83

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EM4 | Carbide-Tipped Jobber-Length Drill Bits

$5.99

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EM5 | Carbide-Tipped Jobber-Length Drill Bits

$5.83

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
× Success！success