Product catagories

Search Products

FilterClear All

Inquiry

Carbide-Tipped Jobber-Length Drill Bits

product-img product-img

827DY6 | Carbide-Tipped Jobber-Length Drill Bits

$47.00

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DY7 | Carbide-Tipped Jobber-Length Drill Bits

$47.00

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DY8 | Carbide-Tipped Jobber-Length Drill Bits

$48.62

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DY9 | Carbide-Tipped Jobber-Length Drill Bits

$52.69

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DZ0 | Carbide-Tipped Jobber-Length Drill Bits

$55.10

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DZ1 | Carbide-Tipped Jobber-Length Drill Bits

$59.99

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DZ2 | Carbide-Tipped Jobber-Length Drill Bits

$59.99

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DZ3 | Carbide-Tipped Jobber-Length Drill Bits

$5.83

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DZ4 | Carbide-Tipped Jobber-Length Drill Bits

$5.99

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DZ5 | Carbide-Tipped Jobber-Length Drill Bits

$5.83

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DZ6 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DZ7 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DZ8 | Carbide-Tipped Jobber-Length Drill Bits

$9.31

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827DZ9 | Carbide-Tipped Jobber-Length Drill Bits

$10.62

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EA0 | Carbide-Tipped Jobber-Length Drill Bits

$10.62

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EA1 | Carbide-Tipped Jobber-Length Drill Bits

$11.75

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EA2 | Carbide-Tipped Jobber-Length Drill Bits

$12.31

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EA3 | Carbide-Tipped Jobber-Length Drill Bits

$13.04

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EA4 | Carbide-Tipped Jobber-Length Drill Bits

$13.77

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EA5 | Carbide-Tipped Jobber-Length Drill Bits

$13.77

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EA6 | Carbide-Tipped Jobber-Length Drill Bits

$14.68

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EA7 | Carbide-Tipped Jobber-Length Drill Bits

$15.55

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EA8 | Carbide-Tipped Jobber-Length Drill Bits

$16.86

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EA9 | Carbide-Tipped Jobber-Length Drill Bits

$18.40

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EC0 | Carbide-Tipped Jobber-Length Drill Bits

$20.08

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EC1 | Carbide-Tipped Jobber-Length Drill Bits

$22.04

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EC2 | Carbide-Tipped Jobber-Length Drill Bits

$24.49

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EC3 | Carbide-Tipped Jobber-Length Drill Bits

$27.48

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EC4 | Carbide-Tipped Jobber-Length Drill Bits

$28.45

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EC5 | Carbide-Tipped Jobber-Length Drill Bits

$28.45

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
× Success！success