Product catagories

Search Products

FilterClear All

Inquiry

Carbide-Tipped Jobber-Length Drill Bits

product-img product-img

827EM6 | Carbide-Tipped Jobber-Length Drill Bits

$5.99

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EM7 | Carbide-Tipped Jobber-Length Drill Bits

$5.83

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EM8 | Carbide-Tipped Jobber-Length Drill Bits

$5.83

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EM9 | Carbide-Tipped Jobber-Length Drill Bits

$5.83

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EN0 | Carbide-Tipped Jobber-Length Drill Bits

$5.99

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EN1 | Carbide-Tipped Jobber-Length Drill Bits

$5.83

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EN2 | Carbide-Tipped Jobber-Length Drill Bits

$5.99

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EN3 | Carbide-Tipped Jobber-Length Drill Bits

$5.99

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EN4 | Carbide-Tipped Jobber-Length Drill Bits

$10.62

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EN5 | Carbide-Tipped Jobber-Length Drill Bits

$10.62

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EN6 | Carbide-Tipped Jobber-Length Drill Bits

$9.31

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EN7 | Carbide-Tipped Jobber-Length Drill Bits

$9.31

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EN8 | Carbide-Tipped Jobber-Length Drill Bits

$9.31

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EN9 | Carbide-Tipped Jobber-Length Drill Bits

$9.31

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EP1 | Carbide-Tipped Jobber-Length Drill Bits

$9.31

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EP2 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EP3 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EP4 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EP5 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EP6 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EP7 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EP8 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827EP9 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827ER0 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827ER1 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827ER2 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827ER3 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827ER4 | Carbide-Tipped Jobber-Length Drill Bits

$7.94

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827ER5 | Carbide-Tipped Jobber-Length Drill Bits

$5.99

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

827ER6 | Carbide-Tipped Jobber-Length Drill Bits

$5.83

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
× Success！success