Search Products

FilterClear All

Inquiry

Roughing Cobalt Square End Mills

55FV35 | Roughing Cobalt Square End Mills

$42.58

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FV36 | Roughing Cobalt Square End Mills

$39.60

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FV38 | Roughing Cobalt Square End Mills

$37.26

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FV39 | Roughing Cobalt Square End Mills

$34.85

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FV41 | Roughing Cobalt Square End Mills

$23.84

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FV97 | Roughing Cobalt Square End Mills

$28.09

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FV98 | Roughing Cobalt Square End Mills

$38.24

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FV99 | Roughing Cobalt Square End Mills

$35.42

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FW04 | Roughing Cobalt Square End Mills

$46.57

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FW11 | Roughing Cobalt Square End Mills

$31.07

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FW12 | Roughing Cobalt Square End Mills

$41.05

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FW13 | Roughing Cobalt Square End Mills

$38.23

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FW18 | Roughing Cobalt Square End Mills

$42.58

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FW19 | Roughing Cobalt Square End Mills

$39.60

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FW21 | Roughing Cobalt Square End Mills

$43.03

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FW41 | Roughing Cobalt Square End Mills

$49.66

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FW42 | Roughing Cobalt Square End Mills

$45.67

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FW94 | Roughing Cobalt Square End Mills

$46.39

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FW95 | Roughing Cobalt Square End Mills

$43.03

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FW97 | Roughing Cobalt Square End Mills

$46.51

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FW98 | Roughing Cobalt Square End Mills

$45.41

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FW99 | Roughing Cobalt Square End Mills

$64.25

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FX07 | Roughing Cobalt Square End Mills

$38.20

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FX08 | Roughing Cobalt Square End Mills

$49.75

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FX09 | Roughing Cobalt Square End Mills

$46.49

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FX13 | Roughing Cobalt Square End Mills

$37.64

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FX14 | Roughing Cobalt Square End Mills

$51.91

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FX15 | Roughing Cobalt Square End Mills

$48.26

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FX17 | Roughing Cobalt Square End Mills

$51.49

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FX39 | Roughing Cobalt Square End Mills

$35.33

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
× Success!success