Search Products

FilterClear All

Inquiry

Roughing Cobalt Square End Mills

55FX92 | Roughing Cobalt Square End Mills

$57.11

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FX93 | Roughing Cobalt Square End Mills

$55.36

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FX95 | Roughing Cobalt Square End Mills

$56.79

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FX98 | Roughing Cobalt Square End Mills

$74.46

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FY07 | Roughing Cobalt Square End Mills

$59.99

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FY15 | Roughing Cobalt Square End Mills

$47.75

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FY16 | Roughing Cobalt Square End Mills

$63.68

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FY17 | Roughing Cobalt Square End Mills

$59.99

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FY18 | Roughing Cobalt Square End Mills

$41.30

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FY24 | Roughing Cobalt Square End Mills

$44.96

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FY25 | Roughing Cobalt Square End Mills

$43.96

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FY26 | Roughing Cobalt Square End Mills

$36.92

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FY36 | Roughing Cobalt Square End Mills

$45.53

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FY76 | Roughing Cobalt Square End Mills

$60.98

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FY77 | Roughing Cobalt Square End Mills

$78.13

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FY78 | Roughing Cobalt Square End Mills

$73.37

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FY85 | Roughing Cobalt Square End Mills

$60.98

Five-flutes end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FY86 | Roughing Cobalt Square End Mills

$80.98

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FY88 | Roughing Cobalt Square End Mills

$79.50

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FY89 | Roughing Cobalt Square End Mills

$73.08

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FY90 | Roughing Cobalt Square End Mills

$55.03

Five-flutes end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FY91 | Roughing Cobalt Square End Mills

$84.65

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FY92 | Roughing Cobalt Square End Mills

$76.81

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FZ56 | Roughing Cobalt Square End Mills

$62.74

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FZ57 | Roughing Cobalt Square End Mills

$87.64

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FZ58 | Roughing Cobalt Square End Mills

$80.50

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FZ62 | Roughing Cobalt Square End Mills

$79.61

Five-flutes end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FZ63 | Roughing Cobalt Square End Mills

$116.35

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FZ64 | Roughing Cobalt Square End Mills

$106.33

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FZ74 | Roughing Cobalt Square End Mills

$68.89

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
× Success!success