Search Products

FilterClear All

Inquiry

Roughing Cobalt Square End Mills

55FZ75 | Roughing Cobalt Square End Mills

$94.01

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FZ76 | Roughing Cobalt Square End Mills

$86.72

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FZ77 | Roughing Cobalt Square End Mills

$68.89

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FZ78 | Roughing Cobalt Square End Mills

$94.01

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FZ87 | Roughing Cobalt Square End Mills

$68.89

Five-flutes end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FZ88 | Roughing Cobalt Square End Mills

$98.28

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FZ89 | Roughing Cobalt Square End Mills

$61.87

Five-flutes end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FZ90 | Roughing Cobalt Square End Mills

$86.44

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FZ91 | Roughing Cobalt Square End Mills

$79.90

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55GA16 | Roughing Cobalt Square End Mills

$68.62

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55GA17 | Roughing Cobalt Square End Mills

$68.89

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55GA19 | Roughing Cobalt Square End Mills

$75.45

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55GA58 | Roughing Cobalt Square End Mills

$87.29

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55GA59 | Roughing Cobalt Square End Mills

$123.19

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55GA62 | Roughing Cobalt Square End Mills

$163.06

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55GA83 | Roughing Cobalt Square End Mills

$76.84

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55GA84 | Roughing Cobalt Square End Mills

$79.81

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55GA85 | Roughing Cobalt Square End Mills

$96.28

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55GA86 | Roughing Cobalt Square End Mills

$105.37

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55GA89 | Roughing Cobalt Square End Mills

$87.29

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55GC34 | Roughing Cobalt Square End Mills

$118.41

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55GC35 | Roughing Cobalt Square End Mills

$173.57

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55GC36 | Roughing Cobalt Square End Mills

$157.39

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55GC38 | Roughing Cobalt Square End Mills

$219.15

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55GC39 | Roughing Cobalt Square End Mills

$199.15

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55GC58 | Roughing Cobalt Square End Mills

$106.53

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55GC59 | Roughing Cobalt Square End Mills

$111.33

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55GC60 | Roughing Cobalt Square End Mills

$126.99

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55GC63 | Roughing Cobalt Square End Mills

$117.34

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55GC80 | Roughing Cobalt Square End Mills

$131.79

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
× Success!success