Search Products

FilterClear All

Inquiry

Roughing Cobalt Square End Mills

55GC62 | Roughing Cobalt Square End Mills

$117.04

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55GC64 | Roughing Cobalt Square End Mills

$139.91

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55GC65 | Roughing Cobalt Square End Mills

$139.64

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55GC84 | Roughing Cobalt Square End Mills

$177.90

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55GD48 | Roughing Cobalt Square End Mills

$149.97

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55GD51 | Roughing Cobalt Square End Mills

$154.85

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55GD52 | Roughing Cobalt Square End Mills

$155.13

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

61KY73 | Roughing Cobalt Square End Mills

$86.41

Five-flutes end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DE74 | Roughing Cobalt Square End Mills

$131.21

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DF40 | Roughing Cobalt Square End Mills

$210.14

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

437V74 | Roughing Cobalt Square End Mills

$33.48

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FR63 | Roughing Cobalt Square End Mills

$20.64

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FR65 | Roughing Cobalt Square End Mills

$26.40

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FR69 | Roughing Cobalt Square End Mills

$22.69

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FR70 | Roughing Cobalt Square End Mills

$30.71

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FR71 | Roughing Cobalt Square End Mills

$28.39

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FR76 | Roughing Cobalt Square End Mills

$31.94

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FR77 | Roughing Cobalt Square End Mills

$29.03

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FR78 | Roughing Cobalt Square End Mills

$29.75

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FR79 | Roughing Cobalt Square End Mills

$26.77

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FT35 | Roughing Cobalt Square End Mills

$20.63

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55FT36 | Roughing Cobalt Square End Mills

$29.75

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FT37 | Roughing Cobalt Square End Mills

$27.28

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FT82 | Roughing Cobalt Square End Mills

$28.73

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FT89 | Roughing Cobalt Square End Mills

$28.39

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FT94 | Roughing Cobalt Square End Mills

$31.94

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FT95 | Roughing Cobalt Square End Mills

$29.53

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FT97 | Roughing Cobalt Square End Mills

$29.75

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55FT98 | Roughing Cobalt Square End Mills

$26.77

The TiN coating on these cobalt end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55FV34 | Roughing Cobalt Square End Mills

$30.75

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
× Success!success