Search Products

FilterClear All

Inquiry

Spiral-Flute STI Taps

54LL50 | Spiral-Flute STI Taps

$37.78

The bright finish on these taps provides a smooth, polished surface. Cobalt taps are harder and provide more wear resistance when tapping hard materials at high speeds than high-speed steel taps.

+ Add to Cart

54LL51 | Spiral-Flute STI Taps

$42.71

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Cobalt taps are harder and provide more wear resistance when tapping hard materials at high speeds than high-speed steel taps.

+ Add to Cart

54LL52 | Spiral-Flute STI Taps

$39.46

The bright finish on these taps provides a smooth, polished surface. Cobalt taps are harder and provide more wear resistance when tapping hard materials at high speeds than high-speed steel taps.

+ Add to Cart

54LL53 | Spiral-Flute STI Taps

$45.38

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Cobalt taps are harder and provide more wear resistance when tapping hard materials at high speeds than high-speed steel taps.

+ Add to Cart

54LL54 | Spiral-Flute STI Taps

$44.14

The bright finish on these taps provides a smooth, polished surface. Cobalt taps are harder and provide more wear resistance when tapping hard materials at high speeds than high-speed steel taps.

+ Add to Cart

54LL55 | Spiral-Flute STI Taps

$50.77

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Cobalt taps are harder and provide more wear resistance when tapping hard materials at high speeds than high-speed steel taps.

+ Add to Cart

33ZD93 | Spiral-Flute STI Taps

$67.03

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. Cobalt taps are harder and provide more wear resistance when tapping hard materials at high speeds than high-speed steel taps.

+ Add to Cart

33ZH68 | Spiral-Flute STI Taps

$48.40

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. Cobalt taps are harder and provide more wear resistance when tapping hard materials at high speeds than high-speed steel taps.

+ Add to Cart

33ZH84 | Spiral-Flute STI Taps

$68.59

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. Cobalt taps are harder and provide more wear resistance when tapping hard materials at high speeds than high-speed steel taps.

+ Add to Cart

33ZH96 | Spiral-Flute STI Taps

$67.47

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. Cobalt taps are harder and provide more wear resistance when tapping hard materials at high speeds than high-speed steel taps.

+ Add to Cart

427R91 | Spiral-Flute STI Taps

$7.62

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. Cobalt taps are harder and provide more wear resistance when tapping hard materials at high speeds than high-speed steel taps.

+ Add to Cart

428N68 | Spiral-Flute STI Taps

$30.68

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. High-speed steel taps provide good wear resistance in general purpose tapping applications in a range of materials.

+ Add to Cart

429A44 | Spiral-Flute STI Taps

$32.35

The bright finish on these taps provides a smooth, polished surface. High-speed steel taps provide good wear resistance in general purpose tapping applications in a range of materials.

+ Add to Cart

33PE08 | Spiral-Flute STI Taps

$16.69

The bright finish on these taps provides a smooth, polished surface. High-speed steel taps provide good wear resistance in general purpose tapping applications in a range of materials.

+ Add to Cart

33PE09 | Spiral-Flute STI Taps

$16.54

The bright finish on these taps provides a smooth, polished surface. High-speed steel taps provide good wear resistance in general purpose tapping applications in a range of materials.

+ Add to Cart

33PE10 | Spiral-Flute STI Taps

$16.69

The bright finish on these taps provides a smooth, polished surface. High-speed steel taps provide good wear resistance in general purpose tapping applications in a range of materials.

+ Add to Cart

33PE11 | Spiral-Flute STI Taps

$19.30

The bright finish on these taps provides a smooth, polished surface. High-speed steel taps provide good wear resistance in general purpose tapping applications in a range of materials.

+ Add to Cart

33ZA34 | Spiral-Flute STI Taps

$47.54

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA35 | Spiral-Flute STI Taps

$63.64

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA36 | Spiral-Flute STI Taps

$37.87

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA37 | Spiral-Flute STI Taps

$42.45

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA38 | Spiral-Flute STI Taps

$30.46

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA39 | Spiral-Flute STI Taps

$34.66

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA40 | Spiral-Flute STI Taps

$31.78

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA41 | Spiral-Flute STI Taps

$35.23

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA42 | Spiral-Flute STI Taps

$30.95

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA44 | Spiral-Flute STI Taps

$32.36

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA45 | Spiral-Flute STI Taps

$34.66

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA46 | Spiral-Flute STI Taps

$32.68

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA47 | Spiral-Flute STI Taps

$36.15

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
× Success!success