Search Products

FilterClear All

Inquiry

Spiral-Flute STI Taps

33ZC09 | Spiral-Flute STI Taps

$113.98

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC10 | Spiral-Flute STI Taps

$131.09

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC11 | Spiral-Flute STI Taps

$113.98

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC12 | Spiral-Flute STI Taps

$133.27

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC13 | Spiral-Flute STI Taps

$113.98

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC14 | Spiral-Flute STI Taps

$131.09

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC15 | Spiral-Flute STI Taps

$115.87

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC16 | Spiral-Flute STI Taps

$133.27

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC17 | Spiral-Flute STI Taps

$115.87

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC18 | Spiral-Flute STI Taps

$131.09

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC19 | Spiral-Flute STI Taps

$163.54

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC20 | Spiral-Flute STI Taps

$188.06

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC21 | Spiral-Flute STI Taps

$163.54

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC22 | Spiral-Flute STI Taps

$188.06

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC23 | Spiral-Flute STI Taps

$163.54

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC24 | Spiral-Flute STI Taps

$188.06

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC25 | Spiral-Flute STI Taps

$163.54

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC26 | Spiral-Flute STI Taps

$188.06

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC27 | Spiral-Flute STI Taps

$209.57

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC28 | Spiral-Flute STI Taps

$241.01

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC29 | Spiral-Flute STI Taps

$213.05

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC30 | Spiral-Flute STI Taps

$245.02

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC31 | Spiral-Flute STI Taps

$213.05

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC32 | Spiral-Flute STI Taps

$245.02

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC33 | Spiral-Flute STI Taps

$213.05

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC34 | Spiral-Flute STI Taps

$245.02

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC35 | Spiral-Flute STI Taps

$276.97

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC36 | Spiral-Flute STI Taps

$318.50

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC37 | Spiral-Flute STI Taps

$272.44

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC38 | Spiral-Flute STI Taps

$313.30

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
× Success!success