Search Products

FilterClear All

Inquiry

Spiral-Flute STI Taps

33ZA48 | Spiral-Flute STI Taps

$31.21

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA49 | Spiral-Flute STI Taps

$35.56

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA50 | Spiral-Flute STI Taps

$34.69

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA51 | Spiral-Flute STI Taps

$38.86

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA52 | Spiral-Flute STI Taps

$37.10

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA53 | Spiral-Flute STI Taps

$39.50

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA54 | Spiral-Flute STI Taps

$38.59

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA55 | Spiral-Flute STI Taps

$43.19

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA56 | Spiral-Flute STI Taps

$46.11

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA57 | Spiral-Flute STI Taps

$53.04

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA58 | Spiral-Flute STI Taps

$37.53

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA59 | Spiral-Flute STI Taps

$43.15

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA60 | Spiral-Flute STI Taps

$30.63

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA61 | Spiral-Flute STI Taps

$35.23

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA62 | Spiral-Flute STI Taps

$30.63

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA63 | Spiral-Flute STI Taps

$35.23

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA64 | Spiral-Flute STI Taps

$31.44

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA65 | Spiral-Flute STI Taps

$36.15

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA66 | Spiral-Flute STI Taps

$30.92

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA67 | Spiral-Flute STI Taps

$35.56

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA68 | Spiral-Flute STI Taps

$34.34

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA69 | Spiral-Flute STI Taps

$38.86

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA70 | Spiral-Flute STI Taps

$33.77

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA71 | Spiral-Flute STI Taps

$39.50

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA72 | Spiral-Flute STI Taps

$37.57

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA73 | Spiral-Flute STI Taps

$43.19

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA74 | Spiral-Flute STI Taps

$37.57

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA75 | Spiral-Flute STI Taps

$43.19

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA76 | Spiral-Flute STI Taps

$38.19

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZA77 | Spiral-Flute STI Taps

$43.19

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
× Success!success