Product catagories

Search Products

FilterClear All

Inquiry

Spiral-Flute STI Taps

product-img product-img

33ZA78 | Spiral-Flute STI Taps

$55.51

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZA79 | Spiral-Flute STI Taps

$63.83

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZA80 | Spiral-Flute STI Taps

$55.51

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZA81 | Spiral-Flute STI Taps

$63.83

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZA82 | Spiral-Flute STI Taps

$55.51

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZA83 | Spiral-Flute STI Taps

$63.83

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZA84 | Spiral-Flute STI Taps

$55.51

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZA85 | Spiral-Flute STI Taps

$63.83

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZA86 | Spiral-Flute STI Taps

$81.76

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZA87 | Spiral-Flute STI Taps

$92.49

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZA88 | Spiral-Flute STI Taps

$80.42

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZA89 | Spiral-Flute STI Taps

$92.49

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZA90 | Spiral-Flute STI Taps

$80.42

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZA91 | Spiral-Flute STI Taps

$92.49

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZA92 | Spiral-Flute STI Taps

$81.76

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZA93 | Spiral-Flute STI Taps

$94.03

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZA94 | Spiral-Flute STI Taps

$101.78

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZA95 | Spiral-Flute STI Taps

$117.04

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZA96 | Spiral-Flute STI Taps

$101.78

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZA97 | Spiral-Flute STI Taps

$117.04

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZA98 | Spiral-Flute STI Taps

$101.78

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZA99 | Spiral-Flute STI Taps

$117.04

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZC01 | Spiral-Flute STI Taps

$100.12

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZC02 | Spiral-Flute STI Taps

$115.13

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZC03 | Spiral-Flute STI Taps

$115.87

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZC04 | Spiral-Flute STI Taps

$133.27

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZC05 | Spiral-Flute STI Taps

$113.98

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZC06 | Spiral-Flute STI Taps

$131.09

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZC07 | Spiral-Flute STI Taps

$113.98

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
product-img product-img

33ZC08 | Spiral-Flute STI Taps

$131.09

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
× Success！success