Search Products

FilterClear All

Inquiry

Spiral-Flute STI Taps

33ZC39 | Spiral-Flute STI Taps

$272.44

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC40 | Spiral-Flute STI Taps

$313.30

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC41 | Spiral-Flute STI Taps

$272.44

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC42 | Spiral-Flute STI Taps

$313.30

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC43 | Spiral-Flute STI Taps

$53.50

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC44 | Spiral-Flute STI Taps

$62.54

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC45 | Spiral-Flute STI Taps

$44.60

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC46 | Spiral-Flute STI Taps

$51.28

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC47 | Spiral-Flute STI Taps

$31.43

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC48 | Spiral-Flute STI Taps

$36.64

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC49 | Spiral-Flute STI Taps

$30.99

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC50 | Spiral-Flute STI Taps

$36.08

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC51 | Spiral-Flute STI Taps

$32.12

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC52 | Spiral-Flute STI Taps

$36.84

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC53 | Spiral-Flute STI Taps

$35.48

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC54 | Spiral-Flute STI Taps

$40.64

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC55 | Spiral-Flute STI Taps

$39.29

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC56 | Spiral-Flute STI Taps

$45.03

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC57 | Spiral-Flute STI Taps

$53.57

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC58 | Spiral-Flute STI Taps

$61.33

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC59 | Spiral-Flute STI Taps

$96.98

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC60 | Spiral-Flute STI Taps

$111.52

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC61 | Spiral-Flute STI Taps

$111.58

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC62 | Spiral-Flute STI Taps

$126.23

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC63 | Spiral-Flute STI Taps

$111.25

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC64 | Spiral-Flute STI Taps

$123.23

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC65 | Spiral-Flute STI Taps

$152.56

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC66 | Spiral-Flute STI Taps

$175.45

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC67 | Spiral-Flute STI Taps

$164.90

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart

33ZC68 | Spiral-Flute STI Taps

$189.65

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. These taps are made from powdered metal, which has a uniform microstructure and grain distribution that gives the material a similar strength as carbide. Powdered-metal taps are tougher and less likely to break than cobalt and high-speed steel taps. They are used for tapping highly abrasive materials such as high-silicon aluminum.

+ Add to Cart
× Success!success